H-type · Dual-shaft four-point
Ask about this model
AC-125 H-type Fin Press
Capacity1250 kN (125 t)
Max speed400 spm
Slide stroke30 / 40 mm
Bolster1355×2000 mm
Technical Specifications
Stroke and speed
| Slide stroke length (mm) | Press speed (no load) (spm) |
|---|---|
| 30 / 40 | 200–400 |
Key parameters
| Capacity | 1250 | kN |
|---|---|---|
| Die height | 275–325 | mm |
| Die height adjustment (max) | 200 | mm |
| Slide size | 1350×1500 | mm |
| Bolster size | 1355×2000×140 | mm |
| Main motor | 22 | kW |
| Total power | 35 | kW |
| Air pressure | 0.55–0.75 | MPa |
| Hydraulic pressure | 11.85 | MPa |
| Aluminum coil ID | Ø150 | mm |
| Aluminum coil OD (max) | Ø1200 | mm |
| Aluminum coil width (max) | 1100 | mm |
| Total weight | 30 | t |
Specifications are subject to the final supply contract and may change with technical improvements without notice.
Complete Line Equipment
Auxiliary equipment for the press, supplied together as a full line
Uncoiler
Die take-out system
Suction unit
Scrap removing device
Dual-station rotating collecting rack
Air-conditioner fin die
Air-conditioner fin die