H-type · Parallel two-point
Ask about this model
AC-60 H-type Fin Press
Capacity600 kN (60 t)
Max speed300 spm
Slide stroke40 / 50 / 60 mm
Bolster880×1100 mm
Video
Technical Specifications
Stroke and speed
| Slide stroke length (mm) | Press speed (no load) (spm) |
|---|---|
| 40 | 150–300 |
| 50 | 150–290 |
| 60 | 150–250 |
Key parameters
| Capacity | 600 | kN |
|---|---|---|
| Die height | 270–320 | mm |
| Die height adjustment (max) | 150 | mm |
| Slide size | 1000×850 | mm |
| Bolster size | 880×1100 | mm |
| Bolster size (max, with auxiliary support) | 880×1520 | mm |
| Main motor | 7.5 | kW |
| Total power | 18.5 | kW |
| Air pressure | 0.55–0.75 | MPa |
| Hydraulic pressure | 10 | MPa |
| Aluminum coil ID | Ø150 | mm |
| Aluminum coil OD (max) | Ø1000 | mm |
| Aluminum coil width (max) | 550 | mm |
| Total weight | 18 | t |
Specifications are subject to the final supply contract and may change with technical improvements without notice.
Complete Line Equipment
Auxiliary equipment for the press, supplied together as a full line
Uncoiler
Die take-out system
Suction unit
Scrap removing device
Dual-station rotating collecting rack
Air-conditioner fin die
Air-conditioner fin die