H-type

AC Series H-type Fin Press

High-speed H-type fin stamping lines for air-conditioner heat exchangers, in parallel two-point and dual-shaft four-point designs, from 60 to 200 t.

The AC series is a complete H-type fin press line: the press itself, plus uncoiler, feeding device, aluminum foil oil lubricator, die take-out device, suction unit, scrap discharge device and a dual-station rotating collecting rack. We can supply the whole line to suit your production needs.

Line components

Uncoiler
Die take-out device
Feeding device
Aluminum foil oil lubricator
Fin press mainframe
Suction unit
Scrap discharge device
Dual-station rotating collecting rack

Models in this series

H-type · Parallel two-point

AC-60

60 t · 600 kN · 150–300 spm

View Products →

H-type · Dual-shaft four-point

AC-125

125 t · 1250 kN · 200–400 spm

View Products →

H-type · Dual-shaft four-point

AC-125H

125 t · 1250 kN · 200–500 spm

View Products →

H-type · Dual-shaft four-point

AC-160

160 t · 1600 kN · 200–400 spm

View Products →

H-type · Parallel two-point

AC-200

200 t · 2000 kN · 150–230 spm

View Products →

Specification comparison

Item	Unit	AC-60	AC-125	AC-125H	AC-160	AC-200
Capacity	kN	600	1250	1250	1600	2000
Slide stroke length	mm	40 / 50 / 60	30 / 40	30	40	60 / 70
Press speed (no load)	spm	150–300	200–400	200–500	200–400	150–230
Die height	mm	270–320	275–325	275–325	260–310	270–320
Die height adjustment (max)	mm	150	200	200	200	200
Slide size	mm	1000×850	1350×1500	1350×1500	1500×1400	1150×1300
Bolster size	mm	880×1100	1355×2000×140	1355×2000×140	1500×2000×140	1190×1320
Bolster size (max, with auxiliary support)	mm	880×1520	—	—	—	1190×1740
Main motor	kW	7.5	22	30	22	22
Total power	kW	18.5	35	43	36	34
Air pressure	MPa	0.55–0.75	0.55–0.75	0.55–0.75	0.55–0.75	0.55–0.75
Hydraulic pressure	MPa	10	11.85	11.85	12.65	15.8
Aluminum coil ID	mm	Ø150	Ø150	Ø150	Ø150	Ø150 / Ø480
Aluminum coil OD (max)	mm	Ø1000	Ø1200	Ø1200	Ø1200	Ø1200
Aluminum coil width (max)	mm	550	1100	1100	1200	850
Total weight	t	18	30	32	34	25

Specifications are subject to the final supply contract and may change with technical improvements without notice.

Complete Line Equipment

Auxiliary equipment for the press, supplied together as a full line

Uncoiler

Die take-out system

Suction unit

Scrap removing device

Dual-station rotating collecting rack

Air-conditioner fin die

Tell us about your production line

Send us your foil specification, fin pattern and target output, and we will recommend a suitable model and configuration.

Contact Sales