H-type · Parallel two-point
Ask about this model
AC-200 H-type Fin Press
Capacity2000 kN (200 t)
Max speed230 spm
Slide stroke60 / 70 mm
Bolster1190×1320 mm
Technical Specifications
Stroke and speed
| Slide stroke length (mm) | Press speed (no load) (spm) |
|---|---|
| 60 | 150–230 |
| 70 | 150–210 |
Key parameters
| Capacity | 2000 | kN |
|---|---|---|
| Die height | 270–320 | mm |
| Die height adjustment (max) | 200 | mm |
| Slide size | 1150×1300 | mm |
| Bolster size | 1190×1320 | mm |
| Bolster size (max, with auxiliary support) | 1190×1740 | mm |
| Main motor | 22 | kW |
| Total power | 34 | kW |
| Air pressure | 0.55–0.75 | MPa |
| Hydraulic pressure | 15.8 | MPa |
| Aluminum coil ID | Ø150 / Ø480 | mm |
| Aluminum coil OD (max) | Ø1200 | mm |
| Aluminum coil width (max) | 850 | mm |
| Total weight | 25 | t |
Specifications are subject to the final supply contract and may change with technical improvements without notice.
Complete Line Equipment
Auxiliary equipment for the press, supplied together as a full line
Uncoiler
Die take-out system
Suction unit
Scrap removing device
Dual-station rotating collecting rack
Air-conditioner fin die
Air-conditioner fin die